What This Product Does

The SR-SG1311FP is a 10-Port Gigabit RJ45 with one SFP Switch, 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 80W, up to 30W per port, SR-SG1311FP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones.

How This Product Works

8 ports of SR-SG1311FP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

Overload Arrangement

SR-SG1311FP has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 120W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.  


Easy To Use

SR-SG1311FP is easy to install and use. It requires no configuration or installation. With its outstanding performance and quality, the SR-SG1311FP 10-Port Gigabit RJ45 with on SFP Switch is a great choice for expanding your network.


[Switch type] Unmanged
[Port Type] Gigabit Ethernet
[Standards and Protocols] IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, 802.3af/at
[Interface] 10 10/100/1000Mbps RJ45 Ports
1 100/1000Mbps SFP Slots
(Auto-Negotiation/Auto MDI/MDIX)
[SFP port] 1SFP
[Network Media] 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100Base-FX: MMF SFP Module
[Fan Quantity] Fanless
[Power Supply] External Power Adapter 130W(Output: 52VDC / 2.5A)
[Dimensions ( W x D x H )] 220 * 135 * 35 mm
[Power Consumption] Maximum (PoE on): 130W (220V/50Hz)
Maximum (PoE off): 8.2W (220V/50Hz)
[PoE Type] PoE 802.3af/at (PSE)
[PoE Ports(RJ45)] 8 PoE Port
[PoE] Standard: 802.3af/at compliant, per port up to 30W
[Switching Capacity] 22Gbps
[Packet Forwarding Rate] 14.9Mpps
[MAC Address Table] 4K
[Packet Buffer Memory] 1.5Mb
[Jumbo Frame] 9KB
[Certification] CE, FCC
[Environment] Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90%RH non-condensing
Storage Humidity: 5%~95%RH non-condensing
[Number of Ports] 5-12